Sea & Sea MDX-X10 Instruction Manual

UNDERWATER HOUSING forFujifilm X10MDX-X10日本語English取扱説明書Instruction Manual06160

E-09Opening and Closung the HousingCAUTION1パチン錠を閉めるClosing the locking lock knobClose the rear case, and rotate the lock knob counterclockwiseBefore

E-10SUPER EBC ｆ＝7.1-28.4mm 1:2.0-2.8FUJINON ASPHERICAL LENSPart AAnti-reflective tapeZoom ringGear for Power/Zoom dialOFFMounting the Camera in the

E-11Mounting the Camera in the Housing1 Turn the lock knob2 Open the rear case3 Remove a camera from a front caseRemoving the camera from the housing

E-12Connecting the StrobeConnect the strobe with the fiber-optic cable (option) when the strobe is triggered by sensing the light from the camera&apos

E-13Use the camera’s built-in flashIf planning to use the built-in flash on the camera, remove the fiber socket adapter from the housing.Remove the tw

E-14External ControlsPower / ZOOM dialShutter leverDepress the shutter lever to press the shutter button of the camera.Mode dialTurning this dial chan

External ControlsE-15Sub command dialMain command dialMain command dialRotate the dial to enable operation. In addition, you can also change the setti

E-16Attaching the Hand Strap CAUTIONDo not use the strap when out of water if using optional accessories (such as a wide-angle conversion lens, stay,

E-17<Example>The tip on the port of this product will accept a SEA&SEA M67 wide-angle conversion lens (52122)* Specifications and appearance

Attaching the Optional AccessoriesAccessory shoeE-18Stays / Arms<Example>Strobes / lights can be mounted to the accessory shoe by using optional

E-1Contents Safety Precautions ... E-2Precautions on Handling the O-ring ...

E-19CAUTIONMaintenance and StorageAfter rinsing, dry the product well with a soft dry cloth, then let the product dry in the shade, out of direct sun

E-20SpecificationsCompatible cameraFujifilm X10ControlsConstructionBody: Corrosion-resistant aluminum alloyDepth rating100m (330ft)DimensionsApprox. 1

1130-Z-01A(2012年3月現在 / Current as of Mar.2012)シーアンドシー・サンパック株式会社〒145-0062 東京都大田区北千束1-4-6TEL.03-5701-5533カスタマーサービスセンターTEL.048-255-8512http://www.seaands

E-2WARNINGCAUTIONSafety PrecautionsWARNING Situations that could result in severe injury or death. CAUTIONSituations that could result in property dam

E-3Safety PrecautionsDo not rest heavy weight on the product. It might deform the outer casing, damage internal parts, make the waterproofing fail,

E-4Precautions on Handling the O-ring CAUTIONAre there any scratches or cracks in the O-ring? Be careful about dust, sand, and hair SEA&SEA produ

E-5Silicone grease protects the O-ring from chafing. After checking the O-ring to make sure that there are no scratches, dust, or debris, apply a ligh

E-6Identification of PartsLock knobWB buttonAE/Playback zoom in buttonTripod socket (bottom)Playback buttonAF/Playback zoom out buttonExposure compens

Preparation for Setting UpPrepare the housing and portPrepare the digital cameraE-7This product must be used in combination with the optional equipmen

E-8Opening and Closing the Housing Opening the lock knobCAUTIONBefore opening the rear case, make sure that the housing is completely dry and free of